June 17 LVD Track rental open slots
There is a track rental at LVD Friday 6/17 and there are some 20+, out of 70 slots still open. I got rained out after one run Weds, so I was thinking about getting some runs in before Ford day...
View ArticleClik here to view.
mac exhaust
anyone in the jersey area have a mac catback they're looking to part ways with?
View ArticleNEED HELP
OK heres the deal, when I start up and drive my Stang I get this crazy beeping sound. Sometimes constant, sometimes random... Its very different then the door chim sound. Anyway I dug into the dash...
View ArticleNeed a shop in New Jersey to tune my 95 cobra
Have a 306 vortech s trim setup I'm having an engine built Need a good shop to put the new engine in and tune it. Was told wicked Motorsport Anyone know of anyplace else in central or South Jersey?
View ArticleModular Engine Machine Shops in North Jersey
I'm looking into getting my engine built, but the cost of machine work I've been quoted so far has been higher than I thought it would be. I'm getting quoted $1,800 - $2,000 to get a Teskid bored...
View ArticleCustom Exhaust Shop Needed
I'm looking for a custom exhaust shop to install the exhaust on my 95 Mustang, any recommendations in the New England area will work, I'll travel. The premade systems I have tried have don't fit well...
View Articlelooking for a T5 trans
Bought myself a nice 93 5.0, factory manual car but the guy kept the T5 .... so I'm on the hunt for one.
View ArticleF/S Foxbody MM Strut Tower Brace MMSTB-2
Not really willing to ship since its a bigger awkward piece. Brand new, just opened the box...would require too much modifications to make it work. So it just sitting now. MM lists this as fitting only...
View ArticleNJ FS: 2.3L/A4LD
Selling a complete motor/trans setup out of my 89 fox. Runs and drives mint with zero issues. 93k original miles. Comes with everything including the exhaust with mufflers/cat. $300
View ArticlePhotos From The Last Ever Mark's Classic Cruise in Granby, CT- Mustang Night
Mark's Classic Cruise was a weekly show in Granby, CT for 25 years. Most weeks brought at least 400-500 cars. Their last ever show was held on 9/13/2021 and went out in style with themed Mustang Night....
View ArticleNEED AOD TRANS REBUILT AND INSTALLED IN CENTRAL NJ
anyone know of a good AOD trans guy in the central jersey area i have a silverfox full manual valve body and 3500 stall just finished up the top end it runs good but before i put the valvebody and...
View ArticleLooking for Fox Mechs in the Eastern MA area
Hey All, Brand new to the site. I have an '88 LX that body wise is in great shape but engine wise she's (likely) needing considerable attention. I'm looking to have some work done and was looking to...
View ArticleTire Shop Suggestions in Plattsburgh, NY Area
Like the title says, I'm looking for recommendations for a decent tire shop in the Plattsburgh, NY area. Need to find a good shop to mount & balance tires on a 2018 Shelby GT350. Thanks for any...
View Article98 v6 mustang
Recently my 98 stang blew the rear driving at 35 its a manual trans. I put a new rear in and found that the ring on the front of driveshaft spun off. I then fixed that and also had motor mounts...
View ArticleNJ Body Shops
Hi All, Can anyone recommend any body shops in NJ/Tri-State area that have experience with fox bodies? Car has been sitting for a while and needs some work. Thanks, Innovatv@aol.com
View ArticleBody Shop Needed in NJ
Hello- looking for a reputable body shop in NJ that is experienced in fox bodies and has a lift in shop to provide some additional attention to the undercarriage. Thanks
View ArticleCan anyone in Central New Jersey help my friend?
Hi guys. I have a friend, he lives in central NJ. and he has a reef blue coupe. It's nice but needs to be finished up...small stuff. He is capable of doing the work and he has his own tools etc. but...
View ArticleNeed maximum motorsports full length subframe connectors installed in MA,...
I'm looking for someone that can weld in the full length subframe connectors properly on a 99 cobra. They're the full length black powdercoated ones with the seat reinforcement braces. I live in the...
View ArticleClik here to view.
Multiple Indoor Heated Garage Spaces Available For Winter Storage
Long time Corral member and Mustang owner has multiple garage spaces available for winter indoor storage in climate controlled garage with gen backed 115V power for battery tenders In by first week of...
View ArticleShock Tower Repair NJ
Any reputable shops in the area that are experience with shock tower repair without ripping me off? Can see clear through the towers lol
View ArticleLooking for a shop to put a new engine in and tune it South Jersey
The time has finally come I have the engine complete I need to find someone that can pull the old engine out put a new engine in and tune it I do have a Vortec anybody around the Trenton area or within...
View ArticlePorting places in Eastern Mass?
Anyone know of any professional shops in the eastern Mass. area? Looking to get a couple of aluminum intakes done. Joe
View Article** Northeast For Sale Thread **
Here is it... lets keep it simple. - Same rules apply as the classifieds ( http://www.corral.net/forums/showthread.php?t=599348 ). - Your location is REQUIRED (both city and state) as it is in the...
View Article**FOR SALE-holley intake and TFS heads, CAM
for sale: holley systemax II intake for sale very clean $430. I might have a one inch spacer to go with it. trickflow twisted wedge heads (stud mount) very clean with 1.6 rockers. (they are blue not...
View ArticleEngine Dynos in MA/CT
Got an engine coming together for my auto-x car and would prefer to engine dyno it to break it in, etc. Forte's in Framingham is booked up until September. I've left a vmail with ABT in Holliston (I...
View Article8.8 builder in MA
Looking to build my rear to a 31 spline and keep the abs. I'm having trouble find a shop to do this specifically. All opinions appreciated. Thanks
View ArticleNeed T56 installed on 99 Cobra
Looking to see if anyone knows of someone who has the facility to install a T56 in a 99 cobra. I have the T56, T56 mount, clutch with new bolts, aluminum flywheel with new bolts, rear main seal, clutch...
View ArticleRKL PERFORMANCE IN WEST WARWICK SUCKS
RKL PERFORMANCE IN WEST WARWICK R.I. SUCKS This is to let all the guys in the local area know that RKL PERFORMANCE SUCKS!! The owner Ray Leathers has been overcharging more then a few guys in the local...
View ArticleMid-Ohio Track Event September 29-October 1, 2023
Mid-Ohio Track Event September 29 - October 1, 2023 with MVP Track Time Mustang Drivers: MVP Track Time would like to invite you to our 6th annual “OH HI OH” September 29 – October 1, 2023 at...
View ArticleFoxbody floor pan supports
Anybody know when I can get floor pan supports for 87-93 Gt hatchback? I'm In CT
View ArticleGood dyno's in Long Island, NY/NYC area??
Looking for good dyno shop in the area, besides Mustang Magic. I want to get my car dynoed again, but I feel mustang magic is too expensive for what they do. Thanks, Mike
View ArticlePerformance shops in CT?
Anybody no where any mustang performance shops are in CT or a good place to get my gears swaped. Maybe a shop that can do engine work like cams, etc, etc. Thanks
View ArticleClik here to view.
Exhaust shops in Eastern Mass.
I'm planning on having a custom exhaust done for my T-Bird this spring. I'm thinking of checking out a few places and was wondering if anyone has had experiences (good or bad) with them. Brad Elliot...
View ArticleRestoration for 1992 Mustang in NJ
Looking for a resto-mod/ factory shop in NJ/ PA area. The car is mostly original 5.0 Lx Hatch. I want it to look factory and all body is original. Maximum Motorsports R/t track box and a few other MM...
View ArticleTune in ct needed
Hello Have a 90 foxbody that i need tuned. Looking to see who people use around CT. Car has the 302 in it with newly installed turbo. For tuning has a Holley terminator X in. thanks in advance for any...
View Article